1- Nguyen, C., Ahmadpour, A. and Do, D.D., “Effect of Gasifying Agents on the Characterization of Nutshell-derived Activated Carbon”, Adsorption Sci. Tech. 12, 247-258 (1995).
2- Ahmadpour, A. and Do, D.D., “Characterization of modified activated carbons: Equilibria and dynamics studies,” Carbon 33, 1393-1398 (1995).
3- Ahmadpour, A. and Do, D.D., “The Preparation of Active Carbons from Coal by Chemical and Physical Activation,” Carbon 34, 471-479 (1996).
4- Ahmadpour, A. and Do, D.D., “The Preparation of Activated Carbon from Macadamia Nutshell by Chemical Activation,” Carbon 35, 1723-1732 (1997).
5- Wang, K., Ahmadpour, A. and Do, D.D., “Equilibria and Kinetics Characterization of Two Different Structured Nutshell-Derived Activated Carbons,” Adsorption 3, 267-275 (1997).
6- Ahmadpour, A., Wang, K., and Do, D.D., “Comparison of Models on the Prediction of Binary Equilibrium Data of Activated Carbons,” AIChE J. 44, 740-752 (1998).
7- Ahmadpour, A., King, B. and Do, D.D., “Comparison of Equilibria and Kinetics of High Surface Area Activated Carbon Produced from Different Precursors and by Different Chemical Treatments,” Ind. Eng. Chem. Res. 37, 1329-1334 (1998).
8- مجيد عابدين زادگان عبدي، محمد مهديارفر، عليمراد رشيدي، علي احمدپور، "ساخت كربن فعال با استفاده از فعال سازي شيميايي پوست گردو"، نشريه علمي- پژوهشي دانشكده مهندسي، دانشگاه فردوسي مشهد، سال 14، شماره 1 (1381).
9- Abedinzadegan Abdi, M., Mahdiarfar, M., Rashidi, A.M., Jalilian, A., Ahmadpour, A. and Mirhabibi, A.R., “Preparation of Carbon Molecular Sieves for Separation and Purification of Gases”, IRAN Petroleum, Issue No. 5, 1382.
10- علي احمدپور، اكبر شاهسوند، "آثار حذف نيتروژن همراه با گاز طبيعي در خطوط لوله: كاهش هزينه هاي انتقال"، نشريه نداي گاز، سال اول، دي ماه (1383).
11- علي احمدپور، محمد مهديارفر، عليمراد رشيدي، مجيد عابدين زادگان عبدي، "ساخت غربال مولكولي كربني توسط فرآيند دو مرحله اي انسداد روزنه هاي كربن فعال"، نشريه علمي- پژوهشي دانشكده مهندسي، دانشگاه فردوسي مشهد ، سال 18، شماره 2 (1385).
12- Shahsavand, A. and Ahmadpour, A., “Application of Optimal RBF Neural Networks for Optimization and Characterization of Porous Materials”, Computers and Chemical Engineering 29, 2134-2143 (2005).
13- Rashidi, A.M., Akbarnejad, M.M., Khodadadi, A.A., Mortazavi, Y. and Ahmadpour, A., “Single-wall carbon nanotubes synthesized using organic additives to Co-Mo catalysts supported on nanoporous MgO”, Nanotechnology 18, 315605,1-5 (2007).
14- علي احمدپور، مسکوکي، عبدالمجيد و رضائي، مسعود، "آبگيري ماست با استفاده از غشاي تراوا و هيدروژل ابرجاذب آکريلي، مجله علوم و تکنولوژي پليمر، سال بيستم، شماره 5، (1386).
15- حامد رشيدي، علي احمدپور، "بررسي مقايسه اي روش هاي ذخيره سازي و انتقال گاز طبيعي شامل فشرده سازي، جذب سطحي و هيدرات"، نشريه مهندسي شيمي ايران،سال هفتم، شماره 37، (1387).
16- هادي پيرمرادي، علي احمدپور، "مروري بر کاربردهاي فناوري نانو در صنايع نفت، گاز و پتروشيمي"، مجله فرآيند نو، سال سوم، شماره 18، (1387).
17- Ahmadpour, A., Tahmasebi, M. Rohani Bastami, T. and Amel Besharati, J., “Rapid removal of cobalt ion from aqueous solutions by almond green hull”, Journal of Hazardous Materials 166, 925-930 (2009).
18- Zabihi, M., Ahmadpour, A. and Haghighi Asl, A., “Removal of mercury from water by carbonaceous sorbents derived from walnut shell”, Journal of Hazardous Materials, 167, 230-236 (2009).
19- Zabihi, M., Haghighi Asl, A. and Ahmadpour, A., “Studies on Adsorption of mercury from aqueous solution on Activated Carbons prepared from walnut shell”, Journal of Hazardous Materials, 174, 251-256 (2010).
20- محمد ذبيحي، علي احمدپور، علي حقيقي اصل، "بررسي عوامل موثر بر حذف جيوه از فاز مايع توسط جذب سطحي بر روي جاذب هاي کربني"، نشريه مهندسي شيمي ايران، سال هشتم، شماره 45، (1388).
21- Ahmadpour, A., Zabihi, M., Tahmasbi, M. and Rohani Bastami, T., “Effect of adsorbents and chemical treatments on the removal of strontium from aqueous solution”, Journal of Hazardous Materials, 182, 552-556 (2010).
22- Bamoharram, F.F., Ahmadpour, A., Heravi, M.M., and Sane Charkhi, M.J., “Bulk and Activated Carbon-Supported Tungstophosphoric Acid as Recyclable and Green Catalyst for One-Pot Synthesis of b-Acetamido Ketones and Esters”, E-Journal of Chemistry, 8 (2), 689-696 (2011).
23- Bamoharram, F.F., Heravi, M.M., Ebrahimi, J., Ahmadpour, A., and Zebarjad, M., “Catalytic Performance of Nano-SiO2-Supported Preyssler Heteropolyacid in Esterification of Salicylic Acid with Aliphatic and Benzylic Alcohols”, Chinese Journal of Catalysis, 32 (5), 782-788 (2011).
24- Maskooki, A., Ahmadpour, A., and Rezaee, M., “Production of concentrated yogurt using superabsorbents and a permeable membrane”, FILTRATION Journal, 11 (2), 107-116 (2011).
25- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., and Rshidi, H., “Photocatalytic Synthesis of Gold Nanoparticles Using Preyssler Acid and Their Photocatalytic Activity”, Chinese Journal of Catalysis, 32 (6), 978-982 (2011).
26- سيده فاطمه بني هاشمي، مجيد پاکيزه، علي احمدپور، مهدي پورافشاري چنار، "ساخت و تعيين مشخصات غشاء زئوليتي نانوساختار ZSM-5"، مجله پژوهش نفت، سال بيستم، شماره 64، 79-65 (1389).
27- Banihashemi, F., Pakizeh, M., and Ahmadpour, A., “CO2 separation using PDMS/ZSM-5 zeolite composite membrane”, Separation and Purification Technology, 79 (3), 293– 302, (2011).
28- Bamoharram, F.F., Ahmadpour, A., and Heravi, M.M., “Synthesis of Carbon Nanotubes via Catalytic Chemical Vapor Deposition Method and Their Modification with Preyssler Anion, [NaP5W30O110]14-”, NANO: Brief Reports and Reviews, 6 (4), 349-355, (2011).
29- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Rashidi, H., and Tanhaei, B., “Application of a New Photocatalyst in the Preparation of Silver Nanoparticles and Investigating Their Photocatalytic Activity”, Journal of Nanostructure in Chemistry, 2 (1), 15-22 (2011).
30- Bamoharram, F.F., Heravi, M.M., Taymouri, H., Zebarjad, M., and Ahmadpour, A., “Preyssler Heteropolyacid Supported on Nano-SiO2: A Green and Reusable Catalyst in Selective Oxidation of Benzyl Alcohols to Benzaldehydes”, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 41, 1–8, (2011).
31- Sheikhi Mehrabadi, Z., Ahmadpour, A., Shahtahmasebi, N., Bagheri Mohagheghi, M.M., “Synthesis and characterization of Cu doped cobalt oxide nanocrystals as methane gas sensors”, Physica Scripta 84 (1), art. no. 015801, (2011).
32- Rahmani, E., Ahmadpour, A., Zebarjad, M., “Enhancing the photocatalytic activity of TiO2 nanocrystalline thin film by doping with SiO2”, Chemical Engineering Journal 174 (2-3), 709-713 (2011).
33- Sahranavard, M., Ahmadpour, A., and Doosti, M.R., “Biosorption of Hexavalent Chromium Ions from Aqueous Solutions using Almond Green Hull as a Low- Cost Biosorbent”, European Journal of Scientific Research (EuroJournals), 58 (3), 392-400 (2011).
34- Pirmoradi, H., Malakootikhah, J., Karimipour, M., Ahmadpour, A., Shahtahmasebi, N., and Ekhtiary Koshky, F., “Study of Cobalt-Doped SnO Thin Films”, Middle-East Journal of Scientific Research, 8 (1), 253-256, (2011).
35- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Rashidi, H., and Tanhaei, B., “Application of Molybdophosphoric Acid in Size-Controlled Synthesis of Gold Nanoparticles under UV Irradiation”, International Journal of Nanoscience and Nanotechnology, 7, No. 2, 87-93 (2011).
36- Hafizi, A., Ahmadpour, A., Heravi, M.M., and Bamoharram, F.F., “Investigation of silica-supported Preyssler nanoparticles as nanocatalysts in alkylation of benzene with 1-decene using artificial intelligence Approach”, Nanotechnology in Engineering and Medicine, 2, 1-5, Nov. (2011).
37- Nazari H., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M. and Eslami, N., “Highly Efficient Synthesis of Aspirin in the Presence of Silica-supported Preyssler Nanoparticles as a Green and Reusable Catalyst”, Journal of Nanostructure in Chemistry (JNSC), 2 (3), (2011).
38- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., and Rashidi, H., “Optimization of the experimental conditions in synthesis of Au NPs using Preyssler heteropolyacid based on the Taguchi robust design”, NANO: Brief Reports and Reviews 7, No. 1 (2012).
39- Bamoharram, F.F., Ahmadpour, A., Heravi, Ayati, A., Rashidi, H., and Tanhaei, B., “Recent Advances in Application of Polyoxometalates for the Synthesis of Nanoparticles”, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42, 209-230 (2012).
40- Hafizi, A., Ahmadpour, A., Heravi, M.M., Bamoharram, F.F., and Khosroshahi, M., “Alkylation of benzene with 1-decene using silica supported preyssler heteropoly acid: Statistical design with response surface methodology”, Chinese Journal of Catalysis, 33, 494–501 (2012).
41- Nazari H., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M. and Eslami, N., “Comparison of Catalysts Preyssler and Silica-Supported Nano Preyssler in the Synthesis of Acetyl Salicylic Acid”, E-Journal of Chemistry, 9 (1), 272-276 (2012).
42- Darabi Mahboub, M.J., Ahmadpour, A., and Rashidi, H., “Improving methane storage on wet activated carbons at various amounts of water”, Journal of Fuel Chemistry and Technology, 40 (4), 385-389 (2012).
43- Rahmani, E., Ahmadpour, A., Zebarjad, M., “Tribological properties of multilayer nanostructure TiO2 thin film doped by SiO2”, Journal of Sol-Gel Science and Technology, 63 (1), 65-71 (2012).
44- Okhovat, A., and Ahmadpour, A., “A Comparative Study on the Effects of Different Chemical Agents on Pore Size Distribution of Macadamia Nutshell-Based Activated Carbons Using Different Models”, Adsorption Science & Technology, 30 (2), 159-170 (2012).
45- Ahmadpour, A., Rohani Bastami, T., Tahmasbi, M., and Zabihi, M., “Rapid removal of heavy metals ions from aqueous solutions by low cost adsorbents”, Int. J. Global Environmental Issues, 12, Nos. 2/3/4, 318-331 (2012).
46- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., “A Green and Simple Route for the Controlled-Size Synthesis of Gold Nanoparticles Using Preyssler Heteropolyacid”, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42, 1309–1314 (2012).
47- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Sillanpää, M., “Rate-Redox Controlled Green Photosynthesis of Gold Nanoparticles using H3+xPMo12-xVxO40”, Gold Bulletin, 45,145-151 (2012).
48- Ahmadpour, A., Tanhaei, B., Bamoharram, F.F., Ayati, A., Sillanpää, M., “Green, Rapid and Facile HPMo-Assisted Synthesis of Silver Nanoparticles”, Current Nanoscience, 8, 880-884 (2012).
49- Darabi Mahboub, M.J., Ahmadpour, A., Rashidi, H., and Jahanshahi, N., “Investigating parameters on the preparation of mesoporous activated carbons by the combination of chemical and physical activations using the Taguchi method”, Adsorption, 18, 297–305 (2012).
50- Okhovat, A., Ahmadpour, A., Ahmadpour, F., and Khaki Yadegar, Z., “Pore Size Distribution Analysis of Coal-Based Activated Carbons: Investigating the Effects of Activating Agent and Chemical Ratio”, ISRN Chemical Engineering, 2012, Article ID 352574, (2012).
51- سيده فاطمه بني هاشمي، علي احمدپور، مجيد پاکيزه، مهدي پورافشاري چنار، "سنتز نانوذرات سيليکاليت-1 و بررسي تاثير تعداد مراحل جوانه‌نشاني روي پايه‌هاي جوانه‌نشاني شده جهت ساخت غشاء زئوليتي با کيفيت بالا"، مجله شيمي و مهندسي شيمي ايران، دوره 31، (1391).
52- مهدي نيک نام شاهرک, اکبر شاهسوند, علي حفيظي درچه, علي احمدپور، "ساختارهاي فلزي آلي (MOF) و کوالانسي آلي (COF) : مروري بر جذب متان، هيدروژن و دي اکسيد کربن"، نشريه مهندسي شيمي ايران، جلد 11، (1391).
53- Es’haghi, Z., Sayfi, A., Ahmadpour, A., Tanha, A., and Samie, A., “Combination of New Solid/Liquid Phase Microextraction Technique Based on Functionalized Multiwalled Carbon Nanotubes with Flame Atomic Absorption Spectroscopy for the Extraction and Determination of Zn(II) in the Environmental Samples”, Micro and Nanosystems, 4, (2012).
54- Ahmadpour, A., Okhovat, A., Darabi Mahboub, M.J., “Pore Size Distribution Analysis of Activated Carbons Prepared from Coconut Shell Using Methane Adsorption Data”, Journal of Physics and Chemistry of Solids, 74 (6), 886–891 (2013). Among the Top 25 Hottest Articles in April to June 2013.
55- Rashidi, H., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Ayati, A., “The novel, one step and facile synthesis of ZnO nanoparticles using heteropolyoxometalates and their photoluminescence behavior”, Advanced Powder Technology, 24, (2013).
56- Hafizi, A., Ahmadpour, A., Koolivand-Salooki, M., Heravi, M.M., and Bamoharram, F.F., “Comparison of RSM and ANN for the investigation of linear alkylbenzene synthesis over H14[NaP5W30O110]/SiO2 catalyst”, Journal of Industrial and Engineering Chemistry, 19, 1981-1989 (2013).
57- Hejri, Z., Ahmadpour, A., Seifkordi, A.A., Zebarjad, S.M., “Role of Nano-Sized TiO2 on Mechanical and Thermal Behavior of Starch/Poly (vinyl alcohol) Blend Films”, International Journal of Nanoscience and Nanotechnology, 8 (4) (2013).
58- Hejri, Z., Seifkordi, A.A., Ahmadpour, A., Zebarjad, S.M., “Biodegradable Starch/Poly (vinyl alcohol) Film Reinforced with TiO2 Nanoparticles”, International Journal of Minerals, Metallurgy and Materials, 20 (10), 1001-1011 (2013).
59- Rahmani, E., Jafari, D., Ahmadpour, A., Zebarjad, M. and Rahmani, H., “Studies on the Applicability of Artificial Neural Network (ANN) in Evaluation of Photocatalytic Performance of TiO2 thin Film Doped by SiO2”, Recent Patents on Chemical Engineering, 6, 68-74, (2013).
60- Rashidi, S., Fanaei, M.A. and Ahmadpour, A., “Modeling of activated carbon preparation from Spanish anthracite based on ANFIS structure”, Transport Phenomena in Nano and Micro Scales, 1, 19-25 (2013).
61- Asadi, S., Hamed Mosavian, M.T. and Ahmadpour, A., “Effect of O2 Concentration on the Reaction Furnace Temperature and Sulfur Recovery Using a TSWEET Process”, Journal of Chemical Engineering & Process Technology, 4, 1000152, (2013).
62- Ahmadpour, A., Rashidi, H., Darabi Mahboub, M.J., Razavi Farmad, M., “Comparing the Performance of KOH with NaOH Activated Anthracites in terms of Methane Storage”, Adsorption Science and Technology, 31 (8), 729-746 (2013).
63- Aghaii, M., Pakizeh, M., and Ahmadpour, A., “Synthesis and characterization of modified UZM-5 as adsorbent for nitrate removal from aqueous solution", Accepted in Separation and Purification Technology, 113, 24-32 (2013).
64- Asadi, S., Hamed Mosavian, M.T., Dehghaninezhad, F., Ahmadpour, A., Abdsheikhi, A., Jokar, A. and Borabadi, R., “Reduction of sulfur components in the tail gas using oxygen concentration”, Wulfenia Journal, 20 (11), (2013).
65- مريم يلداگرد، محسن جهانشاهي، علي احمدپور، "نانوذرات مغناطيسي: بخش اول: خواص نانوذرات مغناطيسي و سنتز آنها"، فصلنامه دنياي نانو، 28، 55-44 (1392).
66- مريم يلداگرد، محسن جهانشاهي، علي احمدپور، "نانوذرات مغناطيسي: بخش دوم: حفاظت، عامل دار کردن و کاربرد"، فصلنامه دنياي نانو، 29، 51-41 (1392).
67- علي حفيظي درچه, مهدي نيک نام شاهرک, علي احمدپور، مرتضي مغربي، اکبر شاهسوند, "روش هاي سنتز و کاربردهاي شبکه هاي آلي- فلزي (MOFs)"، نشريه مهندسي شيمي ايران، سال 12 شماره 70، (1392).
68- Aghaee, M., Pakizeh, M., and Ahmadpour, A., "Synthesis and characterization of modified UZM-5 as adsorbent for nitrate removal from aqueous solution", Separation and Purification Technology, (2013).
69- Hafizi, A., Ahmadpour, A., Heravi, M.M., and Bamoharram, F.F., “The application of silica-supported Preyssler HPA as a heterogeneous and green catalyst for the Alkylation of benzene”, Petroleum Science and Technology, 32 (2014).
70- Rashidi, H., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Zebarjad, S.M., Tayari, F., “Controllable one-step synthesis of ZnO nanostructures using molybdophosphoric acid”, Chemical Papers, 68 (4), (2014).
71- Bamoharram, F.F., Ahmadpour, A., Heravi, “Endohedral functionalisation of multi-wall carbon nanotubes by acidic cesium salt of Preyssler in nanosize”, Micro & Nano Letters, 9 (3), (2014).
72- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Heravi, M.M., Sillanpää, M., “A review on Catalytic Applications of Au/TiO2 Nanoparticles in the Removal of Water Pollutants”, Chemosphere, 107, (2014). Among the Top 25 Hottest Articles in April to June 2014.
73- Kamelian, F.S., Mousavi, S.M., Ahmadpour, A. and Ghaffarian, V., “Preparation of acrylonitrile-butadiene-styrene membrane: Investigation of solvent/nonsolvent type and additive concentration”, Korean Journal of Chemical Engineering, 31 (8), (2014).
74- Es’haghi, Z., Ahmadpour, A., Tanha, A.A., Sayfi, A. and Ayati, A., “Extraction of Cu(II) Ions in Wastewaters Using New Solid/Liquid Phase Microextraction Technique Based on Incorporating Functionalized Carbon Nanotubes into Polypropylene Hollow Fiber”, Open Access Library Journal (OALib), (2014).
75- Ayati, A., Ahmadpour, A., Bamoharram, F.F., Tanhaei, B., Mänttäri, M., Lahtinen, M. and Sillanpää, M., “Novel Au NPs/Preyssler Acid/TiO2 Nanocomposite for the Photocatalytic Removal of Azo Dye”, Separation and Purification Technology, 133 (8), (2014).
76- Hafizi, A., Koolivand-Salooki, M., Janghorbani, A., Ahmadpour, A., and Moradi, M.H., “An investigation of artificial intelligence methodologies in the prediction of dirty amine flow rate of gas sweetening absorption column”, Petroleum Science and Technology, 32 (5), (2014).
77- Ahmadpour, A., Jahanshahi, N., Rashidi, S., Chenarani, N. and Darabi Mahboub, M.J., "Application of Artificial Neural Network and Adaptive Neuro-Fuzzy Inference Systems to predict Activated carbon properties for methane storage", Adsorption Science and Technology, 32 (4), (2014).
78- Bamoharram, F.F., Poorzaki, M., Morsali, A., Beiramabadi, S., Ahmadpour, A., Heravi, M. and Ayati, A., “Synthesis and Characterization of Modified Carbon Nanotubes with Potassium salts of the Monosubstituted Keggin Polyoxometalates”, Micro & Nano Letters, 9 (7), (2014).
79- Ahmadpour, A., Eftekhari, N. and Ayati, A., “Performance of MWCNTs and a Low Cost Adsorbent for Chromium (VI) Ion Removal”, Journal of Nanostructure in Chemistry (JNSC), 4 (4), 171-178, (2014).
80- مرتضي داورپناه، علي احمدپور، "مروري بر جاذب‌هاي اصلاح شده پايه سيليکا و بسپار جهت حذف آلاينده‌هاي آب و فاضلاب"، نشريه مهندسي شيمي ايران، سال 13 شماره 72، (1393).
81- سيده منيره حسيني، محمدحسين محمودي قرايي، سيداحمد مظاهري، علي احمدپور، غلامرضا ثوابي، "بررسي تاثير pH ، دوز جاذب و غلظت اوليه بر جذب سطحي عنصر سرب از آب هاي آلوده توسط گوتيت و گل اخراي جزيره هرمز"، فصلنامه زمين شناسي ايران، سال 8 شماره 31، (1393).
82- Yaghoobpour, E., Ahmadpour, A., Farhadian, N., and Shariaty-Niassar, M., “Molecular dynamics simulation of carbon molecular sieve preparation for air separation”, Korean Journal of Chemical Engineering, 32 (3), (2015).
83- Rashidi, S., Ahmadpour, A., Jahanshahi, N., Darabi Mahboub, M.J. and Rashidi, H., "Application of Artificial Intelligent Modeling for Predicting Activated Carbons Properties Used for Methane Storage", Separation Science and Technology, 50 (1), (2015).
84- Davarpanah, M., Ahmadpour, A. and Rohani Bastami, T., “Preparation and characterization of anion exchange resin decorated with magnetite nanoparticles for removal of p-toluic acid from aqueous solution”, Journal of Magnetism and Magnetic Materials, 375 (1), (2015).
85- Khadempir, S., Ahmadpour, A., Hamed Mosavian, M.T., Ashraf, N., Bamoharram, F.F., Mitchell, S.G., and de la Fuente, J.M., “A polyoxometalate-assisted approach for synthesis of Pd nanoparticles on graphene nanosheets: Synergistic behavior for enhanced electrocatalytic activity”, RSC Advances, 5 (2015).
86- Arjmandi, M., Pirouzram, O. and Ahmadpour, A., “A new approach for determination of neck-pore size distribution (NPSD) of porous membranes via bubble point data”, International Journal of Engineering, Transactions C: Aspects, 28 (6) (2015)
87- Dabir, H., Davarpanah, M., and Ahmadpour, A., “Effects of different operating parameters on the particle size of silver chloride nanoparticles prepared ina spinning disk reactor”, Applied Physics A: Material Science & Processing, (2015).
88- Hassani, A., Hamed Mosavian, M.T., Ahmadpour, A., Farhadian, N., “Hybrid Molecular Simulation of Methane Storage Inside Pillared Graphene”, Journal of Chemical Physics, (2015).
89- Gilak Hakimabadi, S., Ahmadpour, A., Hamed Mosavian, M.T. and Rohani Bastami, T., “Functionalized magnetite/ silica nanocomposite for oily wastewater treatment”, Advances in Environmental Research, 4 (2), (2015).
90- Davarpanah, M., Ahmadpour, A., Rohani Bastami, T. and Dabir H., “Synthesis and application of diethanolamine-functionalized polystyrene as a new sorbent for the removal of p-toluenesulfonic acid from aqueous solution”, Journal of Industrial and Engineering Chemistry, 30 (2015).
91- Kamelian, F.S., Mousavi, S.M. and Ahmadpour, A., “Al2O3 and TiO2 entrapped ABS membranes: Preparation, characterization and study of irradiation effect”, Applied Surface Science, 357 (2015).
92- Toutounchian, N., Ahmadpour, A., Heravi, M.M., Bamoharram, F.F., Ayati, A. and Deymeh, F., “Investigation of Linear Alkylbenzene Syntheses using Nano Titania Supported Dawson Heteropolyacid as Catalyst by statistically design approaches”, Research on Chemical Intermediates, 42 (4), (2015).
93- حميد يزدان پناه، انوشيروان فرشيديان فر، علي احمدپور، علي فائزيان، فريد مختاري، "توليد فوم نرم پلي‌يورتان تقويت شده با نانوذرات آلومينا و بررسي رفتار آکوستيکي و مکانيکي آن"،
مجله مهندسي مکانيک مدرس، (1395).
94- Davarpanah, M., Ahmadpour, A. and Rohani Bastami, T., “Experimental Investigation on the Removal of p-Toluic Acid from Aqueous Solution using Functionalized Polymeric Sorbent”, Chemical Engineering Communications, 203 (9), (2016).
95- Ayati, A., Tanhaei, B., Bamoharram, F.F., Ahmadpour, A., Maydannik, P.S., Sillanpää, M., “Photocatalytic degradation of nitrobenzene by gold nanoparticles decorated polyoxometalate immobilized TiO2 nanotubes”, Separation and Purification Technology, 171 (2016).
96- Asadi, S., Hamed Mosavian, M.T., Ahmadpour, A., “Effect of the membrane operating parameters on the separation of oxygen and hydrogen disulphide”, Indian Journal of Chemical Technology, 23(1) (2016).
97- Hassani, A., Hamed Mosavian, M.T., Ahmadpour, A., Farhadian, N., “Improvement of methane uptake inside graphene sheets using nitrogen, boron and lithium-doped structures: A hybrid molecular simulation”, Korean Journal of Chemical Engineering, 6 (1), (2016).
98- Yaqubzadeh, A.R., Ahmadpour, A., Rohani Bastami, T., Hataminia, M.R., “Low-cost preparation of silica aerogel for optimized adsorptive removal of naphthalene from aqueous solution with central composite design (CCD)”, Journal of Non-Crystalline Solids, 447, (2016).
99- Hassani, A., Hamed Mosavian, M.T., Ahmadpour, A., Farhadian, N., “A comparative theoretical study of methane adsorption on the nitrogen, boron and lithium doped graphene sheets including density functional dispersion correction”, Computational and Theoretical Chemistry, 1084 (1), (2016).
100- Rohani Bastami, T., Ahmadpour, A., “Preparation of magnetic photocatalyst nanohybrid decorated by polyoxometalate for the degradation of a pharmaceutical pollutant under solar light”, Environmental Science and Pollution Research International, 23 (9), (2016).
101- Khadempir, S., Ahmadpour, A., Hamed Mosavian, M.T., Ashraf, N., Bamoharram, F.F., Mitchell, S.G., and de la Fuente, J.M., “Mechanistic insights into the activation process in electrocatalytic ethanol oxidation by phosphomolybdic acid-stabilised palladium(0) nanoparticles (PdNPs@PMo12), RSC Advances, 6 (2016).
102- Darabi Mahboub, M.J., Ahmadpour, A., Rashidi H. and Jahanshahi, N., “Enhancement of methane storage on activated carbons in the presence of water”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (1) (2016).
103- Ahmadpour, A., Afife, M.R., Zebarjad, S.M., Ayati, A. and Bamoharram, F.F., “Synthesis and Characterization of Au NPs/Molybdophosphoric acid/CNT Tri-Component Nanohybrid”, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, July (2016).
104- Ahmadpour, A., Zabihi, M., Rohani Bastami, T., Tahmasbi, M. and Ayati, A., “Rapid removal of mercury ion (II) from aqueous solution by chemically activated eggplant hull adsorbent”, Applied Research in Water and Wastewater, 3 (2016).
105- Asadi, S., Hamed Mosavian, M.T., and Ahmadpour, A., “Mathematical modeling of catalytic behavior of catalyst pellets in crude oils after blocking by liquid sulfur”, Petroleum Science and Technology, 35 (5), (2017).
106- Asadi, S., Hamed Mosavian, M.T., and Ahmadpour, A., “Determining of an optimal diameter for the γ-Al2O3 and Al2O3.H2O catalytic pellets in effect of the sulfur condensation”, Pacific Science, (2017).
107- Razmkhah, M., Ahmadpour, A., Hamed Mosavian, M.T. and Moosavi, F., “What is the effect of carbon nanotube shape on desalination process? A simulation approach”, Desalination, 407 (2017).
108- Moaseri, E., Karimi, M., Kiani, S. and Ahmadpour, A., “Effect of pretreatment process on the characteristics of activated carbons produced from chemical activation of scrap tire”, Environmental Progress & Sustainable Energy, 36 (3), (2017).
109- Rohani Bastami, T. and Ahmadpour, A., Ahmadi Hekmatikar, F., “Synthesis of Fe3O4/ Bi2WO6 nanohybrid for the photocatalytic degradation of pharmaceutical ibuprofen under solar light”, Journal of Industrial and Engineering Chemistry, 51 (2017).
110- Shams-Najafi, S.J., Gholizadeh, M., Ahmadpour, A. and Rostami Charati, F., “ZnO-nanorods as an efficient heterogeneous catalyst for the synthesis of thiazole derivatives in water”, Combinatorial Chemistry & High Throughput Screening, 20 (3) (2017).
111- Hoseinzadeh Bahremand, A., Mousavi, S.M., Ahmadpour, A. and Taherian, M. “Biodegradable blend membranes of poly (butylene succinate)/cellulose acetate/dextran: Preparation, characterization and performance”, Carbohydrate Polymers, 173 (2017).
112- Farsad, A.R., Ahmadpour, A., Rohani Bastami, T. and Yaqubzadeh, A.R., “Synthesis of strong silica aerogel by PEDS at ambient conditions for adsorptive removal of para-dichlorobenzene from water”, Journal of Sol-Gel Science and Technology, 84 (2), (2017).
113- Hassani, A., Hamed Mosavian, M.T., Ahmadpour, A., Farhadian, N., “Improvement of methane storage in nitrogen, boron and lithium doped pillared graphene: A hybrid molecular simulation”, Journal of Natural Gas Science & Engineering, 46 (2017).
114- Mahmoodi, V., Ahmadpour, A., Rohani Bastami, T. and Hamed Mousavian, M.T., “Facile synthesis of BiOI nanoparticles at room temperature and evaluation of their photoactivity under sunlight irradiation”, Journal of Photochemistry and Photobiology, 94 (2017).
115- Akbari, S., Hamed Mosavian, M.T., Moosavi, F., and Ahmadpour, A., “Molecular dynamics simulation of Keggin HPA doped Nafion® 117 as polymer electrolyte membrane”, RSC Advances, 7 (2017).
116- Mahmoodi, V., Rohani Bastami, T. and Ahmadpour, A., “Solar energy harvesting by magnetic-semiconductor nanoheterostrucutre in water treatment technology”, Environmental Science and Pollution Research, 25 (2018).
117- Akbari, S., Moosavi, F., Hamed Mosavian, M.T. and Ahmadpour, A., “Water Dynamics and Proton Transport Mechanisms of Nafion® 117/Phosphotungstic Acid Composite Membrane: A Molecular Dynamics Study”, ChemPhysChem, 18 (2017).
118- Dashtbozorg, A., Kord Firouzjaei, V., Ahmadpour, A. and Azadi Moghaddam, S., “Application of CNTs in Membranes (A Review)”, Journal of Environmentally Friendly Processes, 2 (5), (2017).
119- Babakhani, B., Ostad Movahed, S., Ghazy, S. and Ahmadpour, A., “A new formulation for polymeric separator gels for potential use in blood serum separator tubes”, Progress in Rubber, Plastics and Recycling Technology, 34 (2018).
120- Razmkhah, M., Moosavi, F., Hamed Mosavian, M.T. and Ahmadpour, A., “Tunable Gas Adsorption in Graphene Oxide Framework”, Applied Surface Science, 443 (2018).
121- Shamsaddini Negari, M., Ostad Movahed, S. and Ahmadpour, A., “Separation of polyvinylchloride (PVC), polystyrene (PS) and polyethylene terephthalate (PET) granules using various chemical agents by flotation technique”, Separation and Purification Technology, 194 (2018).
122- Razmkhah, M., Moosavi, F., Hamed Mosavian, M.T. and Ahmadpour, A., “Does electric or magnetic field affect reverse osmosis desalination?”, Desalination, 432 (2018).
123- Razmkhah, M., Hamed Mosavian, M.T., Moosavi, F. and Ahmadpour, A., “CO2 Gas Adsorption into Graphene Oxide Framework: Effect of Electric and Magnetic Field”, Applied Surface Science, 456 (2018).
124- Rashidi, H., Ahmadpour, A., Gholizadeh, M., Bamoharram, F. F. and Moosavi, F., “Effect of Magnetized Ethanol on the Shape Evolution of Zinc Oxide from Nanoparticles to Microrods: Experimental and Molecular Dynamic Simulation Study”, Advanced Powder Technology, 29 (2018).
125- Imanifar, M., Ostad Movahed, S. and Ahmadpour, A., “Effects of peroxide and phenolic cure systems on characteristics of the filled ethylene–propylene–diene monomer rubber (EPDM)”, Journal of Applied Polymer Science, 135 (2018).
126- Mojaverian Kermani, A., Ahmadpour, A., Rohani Bastami, T. and Ghahramaninezhad, M., “Deep oxidative desulfurization of dibenzothiophene with {Mo132} nanoball supported on activated carbon as efficient catalyst at room temperature”, New Journal of Chemistry, 42 (2018).
127- Mahmoodi, V., Ahmadpour, A., Rohani Bastami, T. and Hamed Mosavian, M.T., “PVP assisted synthesis of high efficient BiOI/Graphene oxide nanohybrid and its photocatalytic performance in degradation of organic dye pollutants”, Solar Energy, 176 (2018).
128- Pedram-Rad, T., Es'haghi, Z. and Ahmadpour, A. “Adsorptive desulfurization of model gasoline by using modified bentonite”, Journal of Sulfur Chemistry, 39 (2018).
129- Akbari, S., Hamed Mosavian, M.T., Moosavi, F., and Ahmadpour, A., “Elucidating the morphological aspects and proton dynamics in a hybrid perfluorosulfonic acid membrane for medium-temperature fuel cell applications”, Physical Chemistry Chemical Physics, 20 (2018).
130- Akbari, S., Hamed Mosavian, M.T., Moosavi, F., and Ahmadpour, A., “Atomistic simulation of proton transfer ability of Isopoly acid (IPA)/Heteropoly acid (HPA) doped Nafion 117 for high-temperature fuel cell applications”, Composites Part B: Engineering, 161 (2019).
131- Jaberi, F., Ostad Movahed, S. and Ahmadpour, A., “The study on titanium dioxide-silica binary mixture coated SrAl2O4: Eu2+, Dy3+ phosphor as a photoluminescence pigment in a waterborne paint”, Journal of Fluorescence, (2019).
132- Abolhasani, S., A., Ahmadpour, A., Rohani Bastami, T. and Yaqubzadeh, A.R., “Facile synthesis of mesoporous carbon aerogel for the removal of ibuprofen from aqueous solution by central composite experimental design (CCD)”, Journal of Molecular Liquids, (2019).
133- Sardarabadi, H., Zeinali Heris, S., Ahmadpour, A. and Passandideh-Fard, M., “Experimental investigation of a novel type of two-phase closed thermosyphon filled with functionalized carbon nanotubes/water nanofluids for electronic cooling application”, Journal of Energy Conversion and Management, 188 (2019).
134- Shams-Najafi, S.J., Gholizadeh, M. and Ahmadpour, A., “TiO2-nanoparticles as efficient catalysts for the synthesis of pyridine dicarbonitriles”, Journal of the Chinese Chemical Society, (2019).
135- Tayebi, M., Ostad Movahed, S. and Ahmadpour, A., “The effect of the surface coating of a strontium mono-aluminate europium dysprosium-based (SrAl2O4:Eu2+, Dy3+) phosphor by polyethylene (PE), polystyrene (PS) and their dual system on the photoluminescence properties of the pigment”, RSC Advances, 9 (2019).
136- Akbari, S., Hamed Mosavian, M.T., Moosavi, F., and Ahmadpour, A., “Does the addition of a heteropoly acid change the water percolation threshold of PFSA membranes?”, Physical Chemistry Chemical Physics, 21 (2019).
137- Ahmadpour, A., Khadempir, S., Ashraf, N., Mitchell, S.G. and Ahangari, M.H., “A one-pot route for the synthesis of Au@Pd/PMo12/rGO as a dual functional electrocatalyst for ethanol electro-oxidation and hydrogen evolution reaction”, RSC Advances, 9 (2019).
138- Ghahramaninezhad, M., and Ahmadpour, A., “A new simple protocol for the synthesis of nanohybrid catalyst for oxidative desulfurization of dibenzothiophene”, Environmental Science and Pollution Research, (2019).
139- Rouhani, A., Azimi, N., Akbari, M., Ahmadpour, A. and Ashrafpour, E., “Effect of adding nano size silica on setting time and porosity of mineral trioxide aggregate”, Iranian Endodontic Journal, 14 (3), (2019).
140- Afife, M.R., Ahmadpour, A., Hamed Mosavian, M.T., Ayati, A., Bamoharram, F.F. and Ahmadi Hekmatikar, F., “A green approach to the facile synthesis of colloidal platinum nanoparticles by Preyssler polyoxometalate”, Journal of Nanostructures, (2019).
141- Mirzaei, S., Ahmadpour, A., Shahsavand, A., Rashidi, H., and Arami-Niya, A., “Superior performance of modified pitch-based adsorbents for cyclic methane storage”, Journal of Energy Storage, 28 (2020).
142- Mirzaei, S., Ahmadpour, A., Shahsavand, A., Rashidi, H., and Arami-Niya, A., “A Comparative study between regression and soft computing models to maximize methane storage capacity of anthracite-based adsorbents”, Industrial & Engineering Chemistry Research, (2020).
143- وحيد مجاور، علی احمدپور، طاهره روحانی بسطامی، وحيد محمودی، "سنتز و تعيين مشخصه نانوذرات مغناطيسي مس فريت و کاربرد آن ها براي حذف رنگ قرمز واکنشي 141 از محيط آبي"، نشريه مهندسي متالورژی و مواد، دانشگاه فردوسی مشهد، 31 (1399).
144- Mirzaei, S., Ahmadpour, A., Shahsavand, Nakhaei Pour, A., LotfiKatooli, L., Garmroodi Asil, A., Pouladi, B. and Arami-Niya, A., “Experimental and simulation study of the effect of surface functional groups decoration on CH4 and H2 storage capacity of microporous carbons”, Accepted in Applied Surface Science, (2020).
145- Mojaverian Kermani, A., Mahmoodi, V., Ghahramaninezhad, M., and Ahmadpour, A., “High efficient and green catalyst of {Mo132} nanoballs supported on ionic liquid-functionalized magnetic silica nanoparticles for oxidative desulfurization of dibenzothiophene”, Accepted in Separation and Purification Technology, (2020).