فیلتر بر اساس:

مرتب سازی بر اساس تاریخ
تعداد موارد: ۴۴

Effect of Pre-Heat Treatment and Processing Regime on the Behavior of Aluminum Alloy 2024 During Equal Channel Angular Pressing

Iranian Journal of Materials Forming

مجلات خارجی 2025 February

Effect of pre-rolling aging treatment on evolutions of the microstructure and the texture of aluminium alloy 7005 subjected to heavy cold rolling

Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials

مجلات خارجی 2023 October Volume (79) No (5) Pages (408-413)

Grain refinement, texture evolutions, and strengthening of a recycled aluminium alloy subjected to tube channel pressing

Kovove Materialy

مجلات خارجی 2023 January Volume (61) No (1)

Manufacturing of high strength thin-walled aluminum 6063 tubes through severe plastic deformation combined with peak-aging treatment

Proceedings of the Institution of Mechanical Engineers - Part B

مجلات خارجی 2022 November Volume (237) No (9) Pages (1436-1445)

Recrystallization Kinetics of the ECAP processed stainless steel 316L

International Journal of Iron and Steel Society of Iran

مجلات خارجی 2022 November Volume (19) No (1) Pages (38-46)

Strengthening of aluminium alloy 7005 through imposition of severe plastic deformation supplemented by different ageing treatments

Transactions of Nonferrous Metals Society of China

مجلات خارجی 2021 October Volume (31) No (10) Pages (2909-2921)

Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing

Iranian Journal of Materials Forming

مجلات خارجی 2021 April Volume (8) No (2) Pages (4-11)

Equal channel angular pressing of spheroidal graphite cast iron

Materials Research Express

مجلات خارجی 2019 March Volume (6) No (6) Pages (066542-066550)

Texture evolution of a dilute aluminum alloy subjected to tube channel pressing

Materials Research Express

مجلات خارجی 2019 March Volume (6) No (2)

Improving Hydro-formability of a Ferritic Stainless Steel Tube Through Severe Plastic Deformation

Metallurgical and Materials Transactions A

مجلات خارجی 2018 December Volume (49) No (12) Pages (6052-6062)

Microstructure evolution of a recycled Al–Fe–Si–Cu alloy processed by tube channel pressing

International Journal of Minerals, Metallurgy and Materials

مجلات خارجی 2018 October Volume (25) No (10) Pages (1166-1172)

Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys

Journal of Stress Analysis

مجلات خارجی 2018 September Volume (3) No (1) Pages (47-51)

Optimization of Die Geometry for Tube Channel Pressing

Iranian Journal of Materials Forming

مجلات خارجی 2018 April Volume (5) No (1) Pages (26-35)

New Geometry for TCP: Severe Plastic Deformation of Tubes

Iranian Journal of Materials Forming

مجلات خارجی 2016 October Volume (3) No (2) Pages (64-78)

The effects of die geometry in tube channel pressing: Severe plastic deformation

Proceedings of the Institution of Mechanical Engineers - Part L

مجلات خارجی 2016 February Volume (230) No (1) Pages (263-272)

Effect of aging treatment on the crushing behavior of aluminum 6061 alloy tube

Proceedings of the Institution of Mechanical Engineers - Part L

مجلات خارجی 2015 October Volume (229) No (5) Pages (389-397)

Microstructure and mechanical properties of an Al–Mg–Si tube processed by severe plastic deformation and subsequent annealing

Materials Science and Engineering: A

مجلات خارجی 2015 August Volume (640) Pages (42-50)

Microstructural evolution of aluminum 6061 alloy through tube channel pressing

Materials Science and Engineering: A

مجلات خارجی 2014 October Volume (615) Pages (139-147)

On the natural aging behavior of Aluminum 6061 alloy after severe plastic deformation

Materials Science and Engineering: A

مجلات خارجی 2013 September Volume (580) No (580) Pages (202-208)

Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments

Materials Science and Engineering: A

مجلات خارجی 2013 February Volume (563) Pages (60-67)

Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation

Journal of Materials Engineering and Performance

مجلات خارجی 2012 October Volume (21) No (10) Pages (2099-2105)

بررسی مکانیزم‌های کروی شدن فاز آلفا در طول عملیات حرارتی آلیاژ Ti-811

یازدهمین کنفرانس بین‌المللی مهندسی مواد و متالورژی (iMat2022)

کنفرانس های خارجی | 2022-12-13

Recrystallization Kinetics of the Severely Strained Commercially Pure Copper During Annealing at Half of its Melting Point

پنجمین کنفرانس ملی مواد، متالورژی و معدن

کنفرانس های خارجی | 2022-02-27

Improving hydro - formability of stainless steel tubes by tube channel pressing

NANO SPD 7: 7th International Conference on Nanomaterials by Severe Plastic Deformation

کنفرانس های خارجی | 2017-07-02

Calibration of a Stress-Triaxiality Based Fracture Criterion for a Recycled Aluminum Alloy

5th INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS AND METALLURGY

کنفرانس های خارجی | 2016-11-08

Capability of tube channel pressing as a novel severe plastic deformation process

International Workshop on Bulk Nanostructured Metals

کنفرانس های خارجی | 2012-06-27

اثر دمای آنیل میان بحرانی فولاد دوفازی SAPH440 بر رفتار کششی آن

مهندسی متالورژی و مواد

مجلات داخلی | مهر ۱۴۰۱

تحولات بافت بلوری لوله های فولاد زنگ نزن فریتی 409 در اثر تغییر شکل شدید مومسان و آنیل بعد از آن

مهندسی ساخت و تولید

مجلات داخلی | اردیبهشت ۱۳۹۹ دوره (7) شماره (2) صفحات (42-48)

بررسی رفتار کارپذیری آلیاژ سنگین تنگستن – نیکل – آهن

سیزدهمین کنفرانس بین المللی مهندسی مواد و متالورژی

کنفرانس های داخلی | ۱۴۰۳/۰۹/۲۰

تأثیر عملیات اصطکاکی اغتشاشی بر ریزساختار و مقاومت به خوردگی تیتانیوم خالص تجاری

پنجمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب

کنفرانس های داخلی | ۱۴۰۱/۱۲/۱۰

بررسی ریزساختار و سختی فولاد زنگ‌نزن 409 پس از انجام فرآیند فشار در کانال زاویه‌دار همسان

یازدهمین کنفرانس بین المللی مهندسی مواد و متالورژی ایران

کنفرانس های داخلی | ۱۴۰۱/۰۹/۲۲

تاثیر فرایند نورد زاویه ای در کانال همسان بر مقاومت به خوردگی تیتانیوم خالص تجاری

یازدهمین کنفرانس بین‌المللی مهندسی مواد و متالورژی

کنفرانس های داخلی | ۱۴۰۱/۰۹/۲۲

امکان سنجی ایجاد آلیاژ آنتروپی متوسط با استفاده از فرآیند اصطکاکی اغتشاشی

IMAT2021

کنفرانس های داخلی | ۱۴۰۰/۰۸/۲۵

بررسی اثر زمان پیرسختی در عملیات حرارتی T8 بر رفتار خوردگی آلیاژ آلومینیوم 6061 در محیط 0.25 مولار NaCl

چهارمین کنفرانس بین المللی توسعه فناوری مهندسی مواد، معدن و زمین شناسی

کنفرانس های داخلی | ۱۴۰۰/۰۴/۳۱

تاثیر عنصر بیسموت برتحولات ریزساختار و خواص مکانیکی آلیاژمنیزیم AZ31 حین فرآیند پرس در کانال زاویه دار همسان

نهمین کنفرانس و نمایشگاه بین المللی مهندسی مواد و متالورژی ایران و چهاردهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن ریخته گری ایران

کنفرانس های داخلی | ۱۳۹۹/۰۸/۲۰

بررسی تاثیر عملیات حرارتی بر ریزساختار و سختی فولاد ساده کم کربن تحت فرآیند روزنرانی در کانال همسان زاویه دار

سیزدهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن ریخته گری ایران

کنفرانس های داخلی | ۱۳۹۸/۰۷/۱۵

بررسی تأثیر فرآیند فشردن در کانال زاویه دار موازی (ECAP) بر خوردگی آلیاژ آلومینیوم 5052

هشتمین کنفرانس بین‌المللی مهندسی مواد و متالورژی ایران

کنفرانس های داخلی | ۱۳۹۸/۰۷/۱۵

بررسی اثر مسیر فرایند فشار در کانال زاویه دار همسان -ECAP- بر خواص فولاد زنگ نزن 316L

دومین کنفرانس ملی مهندسی مواد، متالورژی و معدن

کنفرانس های داخلی | ۱۳۹۷/۱۰/۳۰

اثر فرایند پرس کاری در کانال زوایه دار همسان -ECAP- بر تغییرات ریز ساختاری و سختی فولاد زنگ نزن 316L

دومین کنفرانس ملی مهندسی مواد، متالورژی و معدن

کنفرانس های داخلی | ۱۳۹۷/۱۰/۳۰

اثر عملیات حرارتی اولیه بر کارپذیری و تغییرات سختی آلومینیوم 7005 حین نورد

کنفرانس ملی مهندسی مواد، متالورژی و معدن

کنفرانس های داخلی | ۱۳۹۶/۱۲/۰۹

اثر فرآیند پرسکاری در کانالهای هم مقطع زاویه دار (ECAP) بر تغییرات ریزساختاری چدن نشکن

کنفرانس ملی مهندسی مواد، متالورژی و معدن ایران

کنفرانس های داخلی | ۱۳۹۶/۱۲/۰۹

The effect of sintering temperature and nano tungsten carbide content on the physical and microstructural properties of gradient WC-Co nano hardmetalتاثیر دمای تف‌جوشی و میزان ذرات نانوکاربید تنگستن روی خواص فیزیکی و مشخصات ریزساختاری نانوسخت‌فلز گرادیانی WC-Co

ششمین کنفرانس بین المللی مهندسی مواد و متالورژی (IMAT 2017)

کنفرانس های داخلی | ۱۳۹۶/۰۸/۰۶

Investigation of mechanical properties of gradient WC-Co nano hardmetal fabricated by spark plasma sintering method مطالعه‌ی خواص مکانیکی نانو‌سخت‌فلز‌های گرادیانی WC-Co ساخته شده به روش تف‌جوشی پلاسمای جرقه‌ای

ششمین کنفرانس بین المللی مهندسی مواد و متالورژی (IMAT 2017)

کنفرانس های داخلی | ۱۳۹۶/۰۸/۰۶

ایجاد ساختار فوق ریزدانه-نانومتری در فرآیند فشار در کانال لوله ای

چهاردهمین همایش دانشجوئی فناوری نانو

کنفرانس های داخلی | ۱۳۹۲/۱۰/۰۴