فیلتر بر اساس:

مرتب سازی بر اساس تاریخ
تعداد موارد: ۱۰۰

Investigation on Microstructure and Residual Stress Distribution in Dissimilar AA3105/AA2024 Friction Stir Joints

Journal of Materials Engineering and Performance

مجلات خارجی 2024 August Volume (33) No (15) Pages (7763-7769)

Evaluation of dissimilar 7075 aluminum/AISI 304 stainless steel joints using friction stir welding

Journal of Alloys and Metallurgical Systems

مجلات خارجی 2023 September Volume (3) Pages (100017-100017)

Improving Thermal Management of CPU by Surface Roughening of Heat Sinks

Arabian Journal for Science and Engineering

مجلات خارجی 2023 August Volume (49) No (2) Pages (2153-2164)

Development of self-healable acrylic water-based environmental-friendly coating as an alternative to chromates coatings

Progress in Organic Coatings

مجلات خارجی 2023 March Volume (176) No (6) Pages (107402-107409)

Synergistic effect of active-passive methods using fins surface roughness and fluid flow for improving cooling performance of heat sink heat pipes

Experimental Heat Transfer

مجلات خارجی 2023 February Volume (37) No (6) Pages (649-664)

Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers

Journal of Functional Biomaterials

مجلات خارجی 2022 December Volume (13) No (4) Pages (296-311)

In situ electrochemical recomposition of decomposed redox-active species in aqueous organic flow batteries

Nature Chemistry

مجلات خارجی 2022 October Volume (14) No (10) Pages (1103-1109)

Emerging Organic Surface Chemistry for Si Anodes in Lithium‐Ion Batteries: Advances, Prospects, and Beyond

Advanced Energy Materials

مجلات خارجی 2022 August Volume (12) No (32) Pages (2200924-2200955)

Tuning surface wettability of aluminum surface and its correlation with short and long term corrosion resistance in saline solutions

Surface and Coatings Technology

مجلات خارجی 2022 January Volume (429) Pages (127950-127963)

Development of a low-cost activated mesoporous bauxite for the reclamation of used transformer oil

Separation and Purification Technology

مجلات خارجی 2022 January Volume (280) No (1) Pages (119826-119832)

Encapsulation of Cerium Nitrate within Poly(urea-formaldehyde) Microcapsules for the Development of Self-Healing Epoxy-Based Coating

ACS Omega

مجلات خارجی 2021 November Volume (6) No (46) Pages (31147-31153)

Exploring mechano-bactericidal nature of Psalmocharias cicadas wings: an analytical nanotopology investigation based on atomic force microscopy characterization

Surfaces and Interfaces

مجلات خارجی 2021 October Volume (26) No (2021) Pages (101407-101407)

Effect of hydrogen peroxide on bovine serum albumin adsorption on Ti6Al4V alloy: A scanning Kelvin probe force microscopy study

Applied Surface Science

مجلات خارجی 2021 October Volume (563) No (10) Pages (150364-150374)

“Sticky” carbon coating enables high-area-capacity lithium storage of silicon-graphitic carbon hybrid

Carbon

مجلات خارجی 2021 October Volume (184) No (1) Pages (91-101)

A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld

Journal of Materials Science and Technology

مجلات خارجی 2021 July Volume (78) No (7) Pages (38-50)

Uniform nucleation of zincate layer through the optimized etching process to prevent failure in electroless plating on 2024 aluminum alloy

Engineering Failure Analysis

مجلات خارجی 2021 June Volume (124) No (2) Pages (105326-105336)

Effect of Fluid Flow on the Corrosion Performance of as-Cast and Heat-Treated Nickel Aluminum Bronze Alloy (UNS C95800) in Saline Solution

Corrosion and Materials Degradation

مجلات خارجی 2021 February Volume (2) No (1) Pages (61-77)

Heat transfer enhancement of conventional aluminum heat sinks with an innovative, cost-effective, and simple chemical roughening method

Thermal Science and Engineering Progress

مجلات خارجی 2020 December Volume (20) Pages (100742-100752)

Electrochemical and statistical analyses of the combined effect of air-entraining admixture and micro-silica on corrosion of reinforced concrete

Construction and Building Materials

مجلات خارجی 2020 November Volume (262) Pages (120768-120778)

Corrosion Performance of Steel Rebars in the Roof of a 65-Year-Old Underground Reinforced Concrete Water-Storage Tank

Journal of Performance of Constructed Facilities

مجلات خارجی 2020 August Volume (34) No (4) Pages (04020077-04020087)

Access to nanocrystalline, uniform, and fine-grained Ni-P coating with improved anticorrosive action through the growth of ZnO nanostructures before the plating process

Corrosion Science

مجلات خارجی 2020 August Volume (172) Pages (108743-108752)

The effects of an inorganic corrosion inhibitor on the electrochemical behavior of superhydrophobic micro-nano structured Ni films in 3.5% NaCl solution

Surface and Coatings Technology

مجلات خارجی 2020 August Volume (395) Pages (125946-125961)

Effect of Substrate Grain Size on Structural and Corrosion Properties of Electrodeposited Nickel Layer Protected with Self-Assembled Film of Stearic Acid

Materials

مجلات خارجی 2020 April Volume (13) No (9) Pages (2052-2066)

Surface modification of mild steel before acrylic resin coating by hybrid ZnO/GO nanostructures to improve the corrosion protection

Journal of Industrial and Engineering Chemistry

مجلات خارجی 2020 March Volume (83) No (1) Pages (333-342)

Characterization of the passive layer on ferrite and austenite phases of super duplex stainless steel

Applied Surface Science

مجلات خارجی 2019 December Volume (496) Pages (143634-143641)

Fabrication of micro–nano-roughened surface with superhydrophobic character on an aluminium alloy surface by a facile chemical etching process

Bulletin of Materials Science

مجلات خارجی 2019 December Volume (43) No (1)

Compatibility of fabrication of superhydrophobic surfaces and addition of inhibitors in designing corrosion prevention strategies for electrodeposited nickel in saline solutions

Applied Surface Science

مجلات خارجی 2019 November Volume (493) Pages (1243-1254)

Microscale investigation of the correlation between microstructure and galvanic corrosion of low alloy steel A508 and its welded 309/308L stainless steel overlayer

Corrosion Science

مجلات خارجی 2019 July Volume (154) Pages (49-60)

Experimental and computational chemistry studies of two imidazole-based compounds as corrosion inhibitors for mild steel in HCl solution

Journal of Molecular Liquids

مجلات خارجی 2019 July Volume (286) No (1) Pages (110915-110924)

Synergistic effect of a crystal modifier and screw dislocation step defects on the formation mechanism of nickel micro-nanocone

Materials Letters

مجلات خارجی 2019 June Volume (245) No (2) Pages (68-72)

On the material characteristics of a high carbon cast austenitic stainless steel after solution annealing followed by quenching in a CNT nanofluid

International Journal of Materials Research

مجلات خارجی 2019 June Volume (110) No (6) Pages (570-576)

LiMn2O4nanopowders synthesized via gelatin-assisted sol–gel method: Optimization of pH and calcination temperature

International Journal of modern physics B

مجلات خارجی 2019 March Volume (33) No (8) Pages (1950063-1950063)

Application of statistical analysis to evaluate the corrosion resistance of steel rebars embedded in concrete with marble and granite waste dust

Journal of Cleaner Production

مجلات خارجی 2019 February Volume (210) No (1) Pages (837-846)

Mechanical and durability behaviour of concrete with granite waste dust as partial cement replacement under adverse exposure conditions

Construction and Building Materials

مجلات خارجی 2019 January Volume (194) No (1) Pages (143-152)

Characterization of the Native Passive Film on Ferrite and Austenite Phases of Sensitized 2205 Duplex Stainless Steel

Journal of the Electrochemical Society

مجلات خارجی 2019 January Volume (166) No (16) Pages (C609-C616)

Recycled Cobalt from Spent Li-ion Batteries as a Superhydrophobic Coating for Corrosion Protection of Plain Carbon Steel

Materials

مجلات خارجی 2018 December Volume (12) No (90) Pages (1-20)

The effect of gelatin as a chelating agent on the synthesis and characterization of LiMn2O4 nanopowders prepared via sol–gel method

Journal of Sol-Gel Science and Technology

مجلات خارجی 2018 November Volume (88) No (2) Pages (465-473)

Inhibitive effect of Clopidogrel as a green corrosion inhibitor for mild steel; statistical modeling and quantum Monte Carlo simulation studies

Journal of Molecular Liquids

مجلات خارجی 2018 November Volume (269) No (1) Pages (193-202)

Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement

Construction and Building Materials

مجلات خارجی 2018 October Volume (185) No (1) Pages (110-119)

Corrosion behavior and optimization of air‐entrained reinforced concrete, incorporating microsilica

Structural Concrete

مجلات خارجی 2018 October Volume (19) No (5) Pages (1472-1480)

Insights into Galvanic Corrosion Behavior of Ti-Cu Dissimilar Joint: Effect of Microstructure and Volta Potential

Materials

مجلات خارجی 2018 September Volume (11) No (1820) Pages (1-21)

Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM

Corrosion Science

مجلات خارجی 2018 July Volume (140) No (14) Pages (30-39)

Analysis of internal cracks in Type 304 austenitic stainless steel cladding wall of regenerator column in amine treating unit

Engineering Failure Analysis

مجلات خارجی 2018 April Volume (90) Pages (440-450)

Morphology modification of electrodeposited superhydrophobic nickel coating for enhanced corrosion performance studied by AFM, SEM-EDS and electrochemical measurements

Colloids and Surfaces A: Physicochemical and Engineering Aspects

مجلات خارجی 2018 April Volume (547) No (1) Pages (81-94)

TiO2/Cu2O coupled oxide films in Cl ion containing solution: Volta potential and electronic properties characterization by scanning probe microscopy

Materials Chemistry and Physics

مجلات خارجی 2018 March Volume (212) No (6) Pages (403-407)

Correlation between the histogram and power spectral density analysis of AFM and SKPFM images in an AA7023/AA5083 FSW joint

Journal of Alloys and Compounds

مجلات خارجی 2018 February Volume (744) No (2) Pages (174-181)

Shape evolution of water and saline droplets during icing/melting cycles on superhydrophobic surface

Surface and Coatings Technology

مجلات خارجی 2018 January Volume (333) No (1) Pages (201-209)

Characterization of screw dislocation-driven growth in nickel micro-nanostructure electrodeposition process by AFM

Materials Letters

مجلات خارجی 2018 January Volume (210) No (210) Pages (341-344)

The Influence of Cold Plastic Deformation on Passivity of Ti-6Al-4V Alloy Studied by Electrochemical and Local Probing Techniques

Corrosion

مجلات خارجی 2016 October Volume (72) No (1) Pages (110-118)

Electrochemical Characterization of Natural Chalcopyrite Dissolution in Sulfuric Acid Solution in Presence of Peroxydisulfate

Electrochimica Acta

مجلات خارجی 2016 July Volume (212) No (212) Pages (921-928)

Enhanced protective properties of epoxy/polyaniline-camphorsulfonate nanocomposite coating on an ultrafine-grained metallic surface

Applied Surface Science

مجلات خارجی 2016 March Volume (376) Pages (121-132)

Microstructure and corrosion characterization of the interfacial region in dissimilar friction stir welded AA5083 to AA7023

Ali Davoodi ، ،

Corrosion Science

مجلات خارجی 2016 February Volume (107) No (107) Pages (133-144)

Electrochemical corrosion behavior of Pb-Ca-Sn -Sm grid alloy in H2 SO4 solution

Journal of Alloys and Compounds

مجلات خارجی 2015 August Volume (652) Pages (172-178)

Electrochemical corrosion behavior of Pb-Ca-Sn-Sm grid alloy in H2SO4solution

Journal of Alloys and Compounds

مجلات خارجی 2015 August Volume (652) No (652) Pages (172-178)

Evaluation of corrosion resistance of polypyrrole/functionalized multi-walled carbon nanotubes composite coatings on 60Cu–40Zn brass alloy

Ali Davoodi ، ،

Progress in Organic Coatings

مجلات خارجی 2015 July Volume (88) No (7) Pages (106-115)

Electrochemical and quantum chemical study of Thiazolo-pyrimidine derivatives as corrosion inhibitors on mild steel in 1 M H2SO4

Journal of Industrial and Engineering Chemistry

مجلات خارجی 2015 May Volume (25) No (5) Pages (112-121)

The Response Surface Method as an Experimental Design Technique to Explore and Model the Performance of Corrosion Inhibitors

Corrosion

مجلات خارجی 2015 March Volume (71) No (7) Pages (819-827)

The effect of grid configurations on potential and current densitydistributions in positive plate of lead–acid battery vianumerical modeling

Electrochimica Acta

مجلات خارجی 2014 May Volume (115) No (10) Pages (189-196)

The role of constituent phases on corrosion initiation of NiAl bronze in acidic media studied by SEM–EDS, AFM and SKPFM

Corrosion Science

مجلات خارجی 2014 April Volume (80) No (9) Pages (104-110)

Corrosion evaluation of multi-pass welded nickel–aluminum bronze alloy in 3.5% sodium chloride solution: A restorative application of gas tungsten arc welding process

Materials and Design

مجلات خارجی 2014 March Volume (58) No (3) Pages (346-356)

Electrochemical and quantum chemical assessment of two organic compounds from pyridine derivatives as corrosion inhibitors for mild steel in HCl solution under stagnant condition and hydrodynamic flow

Corrosion Science

مجلات خارجی 2014 February Volume (78) No (2) Pages (138-150)

EIS assessment of critical pitting temperature of 2205 duplex stainless steel in acidified ferric chloride solution

Corrosion Science

مجلات خارجی 2014 February Volume (80) No (2) Pages (197-204)

Microstructure and corrosion behaviour of plain carbon steel–B4C composite produced by GTAW method in 3?5 wt-%NaCl solution

Corrosion Engineering, Science and Technology

مجلات خارجی 2014 January Volume (49) No (1) Pages (55-65)

Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM

Corrosion Science

مجلات خارجی 2014 January Volume (79) No (79) Pages (148-158)

Corrosion Inhibitive Evaluation of an Environmentally Friendly Water-Base Acrylic Terpolymer on Mild Steel in Hydrochloric Acid Media

Metallurgical and Materials Transactions A

مجلات خارجی 2013 December Volume (44) No (12) Pages (5493-5504)

Imitating seasonal temperature fluctuations for the H2S corrosion of 304L and 316L austenitic stainless steels

Ali Davoodi ، ،

Metals and Materials International

مجلات خارجی 2013 July Volume (19) No (4) Pages (731-740)

An insight into the influence of morphological and compositional heterogeneity of an individual intermetallic particle on aluminium alloy corrosion initiation

Ali Davoodi ، ، ، ،

Materials and Corrosion

مجلات خارجی 2013 March Volume (64) No (3) Pages (195-198)

New High-Resolution Solution for Measuring Degree of Sensitization of Duplex Stainless Steel 2205 Using Double-Loop Electrochemical Potentiodynamic Reactivation Technique

Corrosion

مجلات خارجی 2013 March Volume (69) No (3) Pages (230-242)

Water-base acrylic terpolymer as a corrosion inhibitor for SAE1018 in simulated sour petroleum solution in stagnant and hydrodynamic conditions

Corrosion Science

مجلات خارجی 2012 November Volume (64) No (6) Pages (44-54)

Influence of heat treatment on microstructure and passivity of Cu–30Zn–1Sn alloy in buffer solution containing chloride ions

Bulletin of Materials Science

مجلات خارجی 2012 February Volume (35) No (1) Pages (99-107)

Theoretical and electrochemical assessment of inhibitive behavior of some thiophenol derivatives on mild steel in HCl

Corrosion Science

مجلات خارجی 2011 July Volume (53) No (10) Pages (3058-3067)

Galvanic corrosion of gas tungsten arc repair welds in 17-4 PH stainless steel in 3/5% NaCl solutionr

Corrosion Engineering, Science and Technology

مجلات خارجی 2011 April Volume (46) No (4) Pages (406-414)

Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium

Corrosion Science

مجلات خارجی 2011 April Volume (53) No (4) Pages (1278-1287)

Microstructural and mechanical properties of friction stir welded Cu–30Zn brass alloy at various feed speeds: Influence of stir bands

Materials and Design

مجلات خارجی 2011 March Volume (32) Pages (2749-2755)

Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3/5%NaCl

Corrosion Engineering, Science and Technology

مجلات خارجی 2011 March Volume (46) No (4) Pages (415-424)

Critical pitting temperature (CPT) assessment of 2205 duplex stainless stell in 0.1 M NaCl at various molybdate concentrationsl

Corrosion Science

مجلات خارجی 2011 March Volume (53) No (53) Pages (513-522)

Inhibitive effect of synthesized 2-(3-pyridyl)-3,4-dihydro-4-quinazolinone as a corrosion inhibitor for mild steel in hydrochloric acid

Materials Chemistry and Physics

مجلات خارجی 2011 March Volume (126) No (3) Pages (873-879)

A comparative H2S corrosion study of 304L and 316L stainless steels in acidic media

Ali Davoodi ، ، ،

Corrosion Science

مجلات خارجی 2011 February Volume (53) No (2) Pages (399-408)

Effect of thermomechanical parameters on dynamically recrystallized grain size of AZ91 magnesium alloy

، ، ، Ali Davoodi

Journal of Alloys and Compounds

مجلات خارجی 2011 February Volume (509) No (6) Pages (2703-2708)

Minuscule device for hydrogen generation/electrical energy collection system on aluminum alloy surface

International Journal of Hydrogen Energy

مجلات خارجی 2011 February Volume (36) No (4) Pages (2855-2859)

Correlation between critical pitting temperature and degree of sensitisationon alloy 2205 duplex stainless steel

Corrosion Science

مجلات خارجی 2011 February Volume (83) No (53) Pages (637-644)

Improving the corrosion behaviour of powder metallurgical 316L alloy by prepassivation in 20% nitric acid

Corrosion Science

مجلات خارجی 2011 January Volume (53) No (1) Pages (135-146)

Tuning DOS measuring parameters based on double-loop EPR in H2SO4 containing KSCN by Taguchi method

Corrosion Science

مجلات خارجی 2010 June Volume (52) No (8) Pages (2653-2660)

The effect of homogenization on microstructure and hot ductility behaviour of AZ91 magnesium alloy

، ، ، Ali Davoodi ،

Kovove Materialy

مجلات خارجی 2010 May Volume (48) No (5) Pages (277-ľ87)

Developing an AFM-Based SECM System; Instrumental Setup, SECM Simulation, Characterization, and Calibration

Ali Davoodi ، ، ، ،

Journal of the Electrochemical Society

مجلات خارجی 2008 August Volume (155) No (8) Pages (C474-485)

The Role of Intermetallic Particles in Localized Corrosion of an Aluminum Alloy Studied by SKPFM and Integrated AFM/SECM

Ali Davoodi ، ، ،

Journal of the Electrochemical Society

مجلات خارجی 2008 May Volume (155) No (5) Pages (C211-218)

Multianalytical and in situ studies of localized corrosion of EN AW-3003 alloy - Influence of intermetallic particles

Ali Davoodi ، ، ،

Journal of the Electrochemical Society

مجلات خارجی 2008 January Volume (155) No (4) Pages (138-146)

Integrated AFM and SECM for in situ studies of localized corrosion of Al alloys

Ali Davoodi ، ، ،

Electrochimica Acta

مجلات خارجی 2007 October Volume (52) No (27) Pages (7697-7705)

Probing of local dissolution of Al-alloys in chloride solutions by AFM and SECM

Ali Davoodi ، ، ،

Applied Surface Science

مجلات خارجی 2006 May Volume (252) No (15) Pages (5499-5503)

In Situ Investigation of Localized Corrosion of Aluminum Alloys in Chloride Solution Using Integrated EC-AFM/SECM Techniques

Ali Davoodi ، ، ،

Electrochemical and Solid-State Letters

مجلات خارجی 2005 August Volume (8) No (6) Pages (B21-24)

Hot corrosion mechanisms of magnesite-chromite refractories used at reverberatory furnances in Iran's sarcheshmeh copper complex and development of Iranian refractory productions

، ، Ali Davoodi

International Journal of Engineering

مجلات خارجی 2003 January Volume (16) No (1) Pages (71-79)

FABRICATION OF SUPERHYDROPHOBIC SURFACE ON THE fsw ZONE IN FRACTION STIR WELDING OF SIMILAR ALUMINUM ALLOYS

IIAC2018) IRAN INTERNATIONAL ALUMINUM CONFERENCE )

کنفرانس های خارجی | 2018-04-24

ریزساختار و خواص مکانیکی اتصالات همجنس و غیرهمجنس فولادهای هواناپذیر و ساده کربنی به روش جوشکاری قوس فلز با گاز محافظ دی اکسید کربن

علوم و فناوری جوشکاری ایران

مجلات داخلی | مرداد ۱۴۰۱ دوره (8) شماره (1) صفحات (17-27)

ریشهیابی علت نشتی سیال از کف مخزن ذخیرهسازی کاستیک با استفاده از شبیهسازی سیستم حفاظت کاتدی

مواد نوین

مجلات داخلی | تیر ۱۳۹۸ دوره (9) شماره (4) صفحات (117-132)

رسوب دهی الکتروشیمیایی نانوصفحات نیکل -کبالت-منگنز بر روی میکرومخروط های نیکل برای تولید هیدروژن

یازدهمین کنفرانس بین المللی مهندسی مواد و متالورژی (iMat۲۰۲۲)

کنفرانس های داخلی | ۱۴۰۱/۰۹/۲۲

تاثیر زمان پوشش دهی و pH حمام آبکاری بر مکانیسم خوردگی پوشش آلیاژی نیکل مس بر زیرلایه فولاد ساده کربنی به روش امپدانس الکتروشیمیایی

دومین کنفرانس بین‌المللی کاربرد مواد و ساخت پیشرفته در صنایع

کنفرانس های داخلی | ۱۴۰۱/۰۴/۲۹

میکرو ساختار و خواص مکانیکی منطقه جوش در اتصال فولاد هوا ناپذیر Corten A به فولاد ساده کربنی St12 به روش جوشکاری قوس فلز با گاز محافظ دی‌اکسید کربن

چهارمین کنفرانس بین المللی جوش و آزمون های غیرمخرب

کنفرانس های داخلی | ۱۴۰۰/۱۲/۱۸

بررسی اثر افزودن گرافن نانوساختار بر رفتار خوردگی بیوکامپوزیت منیزیم- استرانسیوم-کلسیم در الکترولیت شبیه ساز بدن

نوزدهمین کنگره ملی خوردگی

کنفرانس های داخلی | ۱۳۹۸/۱۲/۰۶

بررسی هم افزایی بازدانده آلی بر سطوح ابر آبگریز نیکل

نوزدهمین کنگره ملی خوردگی ایران

کنفرانس های داخلی | ۱۳۹۸/۱۲/۰۶

بهبود عملکرد هیت سینکهای آلومینیومی مورد استفاده در صنایع الکترونیک

هجدهمین کنفرانس دینامیک شاره ها

کنفرانس های داخلی | ۱۳۹۸/۰۶/۰۵